| Product specificztions (as per MORT & H 2013 CLAUSE 514.3.1) | ||
|---|---|---|
| Requirements | Specifications | Test Method |
| Residue on 600μm IS sieve (percent by mass), maximum | 0.05 | IS:8887 |
| Viscocity by Say bolt Furol Viscometer, at 25°C, in second | 20-100 | IS:8887 |
| Coagulation of emulsion at low temperature | Nil | IS:8887 |
| Storage stability after 24 h(168 h), % maximum | 2(4) | IS:8887 |
| Particle charge, +ve/-ve | +ve | IS:8887 |
| Test On Residue | ||
| a) Residue by evaporation, % maximum | 60 | IS:8887 |
| b) Penetration at 25°C/100g/5 sec/dmm | 40-100 | IS:1203 |
| c) Ductility at 27°C, cm, minimum | 50 | IS:1208 |
| d) Softening point, in °C, minimum | 57 | IS:1205 |
| e) Elastic recovery*, %, miminum | 50 | IS:15462 |
| f) Solubility in tri-chloroethylene, % minimum | 97 | IS:1216 |
*In case, elastic recovery is tested for Torsional Elasticity Recovery as per Appendix-8 of IRC 81, the minimum value shall be 20%
Application of Bitumen Emulsion
- Dressing Up Road Surfaces.
- Road Development, Construction & Maintenance.
- For Application use of Prime & Tack Coating.
- For Application use of Crack Seal, Fog Seal, Seal Coating, etc.
- Mixed Aggregate for Road Construction.
- For making roofing Products for household & industrial application From Emulsion to Paints to Sound proofing.